Automatic welding machine can realize the mechanization and automation of welding process, which is a great change in order to adapt to the industrial upgrading and industrial transformation development in China. It not only marks higher welding production efficiency and better welding quality, but also greatly improves the production and working conditions. When using the automatic welding machine, do you know that the automatic welding machine needs to be adjusted according to different environments.

1.自動焊機作業時，氣路、水冷系統應暢 通。氣體應保持干燥。排水溫度不得超過40℃，排水量可根據氣溫調節。嚴禁在電弧引燃過程中斷開熔斷器。當焊縫焊渣時，應戴防護眼鏡，頭部應避開敲擊焊渣飛濺方向。雨天不得在露天電焊。在潮濕地帶作業時，包括全 面自然通風和全 面機械通風兩種。

1. When the automatic welding machine is working, the gas path and water cooling system should be unblocked. The gas should be kept dry. The drainage temperature shall not exceed 40 ℃, and the drainage volume can be adjusted according to the air temperature. It is strictly forbidden to disconnect the fuse during arc ignition. When removing welding slag, wear protective glasses, and keep the head away from the splashing direction of welding slag. Welding in the open air is not allowed in rainy days. When working in humid area, there are two kinds of ventilation: natural ventilation and mechanical ventilation.

2.全 面自然通風通過車間側窗和天窗進行自然換氣。全 面機械通風通過管道及風機等組成通風系統進行全車間通風換氣，通車有上抽排煙、下抽排煙和橫向排煙三種方式。

2. Full natural ventilation, natural ventilation through the workshop side window and skylight. The ventilation system is composed of pipes and fans to ventilate the whole workshop. There are three ways to open to traffic: upper exhaust, lower exhaust and transverse exhaust.

現場使用的自動焊機，應設有防雨、防潮、防曬的機棚，并應裝設相應的消防器材。高空焊接或切割時，必須系好帶，焊接周圍和下方應采取防火措施，并應有專人監護操作人員應站在鋪有絕緣物品的地方，并應穿絕緣鞋。

The automatic welding machine used on site shall be equipped with rain proof, moisture-proof and sun proof shed, and corresponding fire-fighting equipment. When welding or cutting at high altitude, the safety belt must be fastened, fire prevention measures shall be taken around and below the welding, and special person shall be assigned to supervise. The operator shall stand at the place paved with insulating materials and wear insulating shoes.